serial: caif: fix use-after-free in caif_serial ldisc_close()
There is a use-after-free bug in caif_serial where handle_tx() may
access ser->tty after the tty has been freed.
The race condition occurs between ldisc_close() and packet transmission:
CPU 0 (close) CPU 1 (xmit)
------------- ------------
ldisc_close()
tty_kref_put(ser->tty)
[tty may be freed here]
<-- race window -->
caif_xmit()
handle_tx()
tty = ser->tty // dangling ptr
tty->ops->write() // UAF!
schedule_work()
ser_release()
unregister_netdevice()
The root cause is that tty_kref_put() is called in ldisc_close() while
the network device is still active and can receive packets.
Since ser and tty have a 1:1 binding relationship with consistent
lifecycles (ser is allocated in ldisc_open and freed in ser_release
via unregister_netdevice, and each ser binds exactly one tty), we can
safely defer the tty reference release to ser_release() where the
network device is unregistered.
Fix this by moving tty_kref_put() from ldisc_close() to ser_release(),
after unregister_netdevice(). This ensures the tty reference is held
as long as the network device exists, preventing the UAF.
Note: We save ser->tty before unregister_netdevice() because ser is
embedded in netdev's private data and will be freed along with netdev
(needs_free_netdev = true).
How to reproduce: Add mdelay(500) at the beginning of ldisc_close()
to widen the race window, then run the reproducer program [1].
Note: There is a separate deadloop issue in handle_tx() when using
PORT_UNKNOWN serial ports (e.g., /dev/ttyS3 in QEMU without proper
serial backend). This deadloop exists even without this patch,
and is likely caused by inconsistency between uart_write_room() and
uart_write() in serial core. It has been addressed in a separate
patch [2].
KASAN report:
==================================================================
BUG: KASAN: slab-use-after-free in handle_tx+0x5d1/0x620
Read of size 1 at addr ffff8881131e1490 by task caif_uaf_trigge/9929
Call Trace:
<TASK>
dump_stack_lvl+0x10e/0x1f0
print_report+0xd0/0x630
kasan_report+0xe4/0x120
handle_tx+0x5d1/0x620
dev_hard_start_xmit+0x9d/0x6c0
__dev_queue_xmit+0x6e2/0x4410
packet_xmit+0x243/0x360
packet_sendmsg+0x26cf/0x5500
__sys_sendto+0x4a3/0x520
__x64_sys_sendto+0xe0/0x1c0
do_syscall_64+0xc9/0xf80
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f615df2c0d7
Allocated by task 9930:
Freed by task 64:
Last potentially related work creation:
The buggy address belongs to the object at ffff8881131e1000
which belongs to the cache kmalloc-cg-2k of size 2048
The buggy address is located 1168 bytes inside of
freed 2048-byte region [ffff8881131e1000, ffff8881131e1800)
The buggy address belongs to the physical page:
page_owner tracks the page as allocated
page last free pid 9778 tgid 9778 stack trace:
Memory state around the buggy address:
ffff8881131e1380: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8881131e1400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff8881131e1480: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff8881131e1500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8881131e1580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
[1]: https://gist.github.com/mrpre/f683f244544f7b11e7fa87df9e6c2eeb
[2]: https://lore.kernel.org/linux-serial/20260204074327.226165-1-jiayuan.chen@linux.dev/T/#u
Analysis and contextual insights are available on OpenCVE Cloud.
No vendor fix or workaround currently provided.
Additional remediation guidance may be available on OpenCVE Cloud.
Tracking
Sign in to view the affected projects.
| Source | ID | Title |
|---|---|---|
Debian DLA |
DLA-4606-1 | linux security update |
Thu, 28 May 2026 14:30:00 +0000
| Type | Values Removed | Values Added |
|---|---|---|
| Weaknesses | CWE-416 |
Thu, 28 May 2026 12:15:00 +0000
| Type | Values Removed | Values Added |
|---|---|---|
| Weaknesses | CWE-364 | |
| References |
|
Wed, 27 May 2026 16:30:00 +0000
| Type | Values Removed | Values Added |
|---|---|---|
| Weaknesses | CWE-416 |
Wed, 27 May 2026 14:15:00 +0000
| Type | Values Removed | Values Added |
|---|---|---|
| Description | In the Linux kernel, the following vulnerability has been resolved: serial: caif: fix use-after-free in caif_serial ldisc_close() There is a use-after-free bug in caif_serial where handle_tx() may access ser->tty after the tty has been freed. The race condition occurs between ldisc_close() and packet transmission: CPU 0 (close) CPU 1 (xmit) ------------- ------------ ldisc_close() tty_kref_put(ser->tty) [tty may be freed here] <-- race window --> caif_xmit() handle_tx() tty = ser->tty // dangling ptr tty->ops->write() // UAF! schedule_work() ser_release() unregister_netdevice() The root cause is that tty_kref_put() is called in ldisc_close() while the network device is still active and can receive packets. Since ser and tty have a 1:1 binding relationship with consistent lifecycles (ser is allocated in ldisc_open and freed in ser_release via unregister_netdevice, and each ser binds exactly one tty), we can safely defer the tty reference release to ser_release() where the network device is unregistered. Fix this by moving tty_kref_put() from ldisc_close() to ser_release(), after unregister_netdevice(). This ensures the tty reference is held as long as the network device exists, preventing the UAF. Note: We save ser->tty before unregister_netdevice() because ser is embedded in netdev's private data and will be freed along with netdev (needs_free_netdev = true). How to reproduce: Add mdelay(500) at the beginning of ldisc_close() to widen the race window, then run the reproducer program [1]. Note: There is a separate deadloop issue in handle_tx() when using PORT_UNKNOWN serial ports (e.g., /dev/ttyS3 in QEMU without proper serial backend). This deadloop exists even without this patch, and is likely caused by inconsistency between uart_write_room() and uart_write() in serial core. It has been addressed in a separate patch [2]. KASAN report: ================================================================== BUG: KASAN: slab-use-after-free in handle_tx+0x5d1/0x620 Read of size 1 at addr ffff8881131e1490 by task caif_uaf_trigge/9929 Call Trace: <TASK> dump_stack_lvl+0x10e/0x1f0 print_report+0xd0/0x630 kasan_report+0xe4/0x120 handle_tx+0x5d1/0x620 dev_hard_start_xmit+0x9d/0x6c0 __dev_queue_xmit+0x6e2/0x4410 packet_xmit+0x243/0x360 packet_sendmsg+0x26cf/0x5500 __sys_sendto+0x4a3/0x520 __x64_sys_sendto+0xe0/0x1c0 do_syscall_64+0xc9/0xf80 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f615df2c0d7 Allocated by task 9930: Freed by task 64: Last potentially related work creation: The buggy address belongs to the object at ffff8881131e1000 which belongs to the cache kmalloc-cg-2k of size 2048 The buggy address is located 1168 bytes inside of freed 2048-byte region [ffff8881131e1000, ffff8881131e1800) The buggy address belongs to the physical page: page_owner tracks the page as allocated page last free pid 9778 tgid 9778 stack trace: Memory state around the buggy address: ffff8881131e1380: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8881131e1400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8881131e1480: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881131e1500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8881131e1580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== [1]: https://gist.github.com/mrpre/f683f244544f7b11e7fa87df9e6c2eeb [2]: https://lore.kernel.org/linux-serial/20260204074327.226165-1-jiayuan.chen@linux.dev/T/#u | |
| Title | serial: caif: fix use-after-free in caif_serial ldisc_close() | |
| First Time appeared |
Linux
Linux linux Kernel |
|
| CPEs | cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:* | |
| Vendors & Products |
Linux
Linux linux Kernel |
|
| References |
|
|
Status: PUBLISHED
Assigner: Linux
Published:
Updated: 2026-05-27T12:15:46.135Z
Reserved: 2026-05-13T15:03:33.080Z
Link: CVE-2026-45866
No data.
Status : Awaiting Analysis
Published: 2026-05-27T14:16:58.963
Modified: 2026-06-17T10:52:38.097
Link: CVE-2026-45866
OpenCVE Enrichment
Updated: 2026-05-28T17:30:15Z
Debian DLA