| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Initialization of a resource with an insecure default in GitHub Copilot and Visual Studio Code allows an unauthorized attacker to disclose information over a network. |
| In the Linux kernel, the following vulnerability has been resolved:
can: ucan: fix devres lifetime
USB drivers bind to USB interfaces and any device managed resources
should have their lifetime tied to the interface rather than parent USB
device. This avoids issues like memory leaks when drivers are unbound
without their devices being physically disconnected (e.g. on probe
deferral or configuration changes).
Fix the control message buffer lifetime so that it is released on driver
unbind. |
| An issue in Zhoros SuperBin v1.0.0 allows attackers to execute a directory traversal via supplying files with names containing traversal characters. |
| A vulnerability in Cisco ISE and ISE-PIC could allow an authenticated, remote attacker to execute arbitrary commands on the underlying operating system of an affected device. To exploit this vulnerability, the attacker must have valid administrative credentials.
This vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected device. A successful exploit could allow the attacker to obtain user-level access to the underlying operating system and then elevate privileges to root. In single-node deployments, successful exploitation of this vulnerability could cause the affected ISE node to become unavailable, resulting in a denial of service (DoS) condition. In that condition, endpoints that have not already authenticated would be unable to access the network until the node is restored. |
| pam_usb provides hardware authentication for Linux using ordinary removable media. In versions 0.9.1 and below, the xfree() memory release helper in calls free() without first zeroing the buffer contents, releasing heap-allocated buffers containing sensitive data — including one-time pad bytes read from disk — without clearing, leaving the sensitive content in freed heap memory until it happens to be overwritten by a subsequent allocation. On a system where a use-after-free condition exists, or where a heap inspection primitive becomes available, this could allow recovery of pad values or other authentication material from freed memory regions. This is a defence-in-depth requirement consistent with prior hardening work in this codebase (GHSA-vx6f-rrqr-j87c applied explicit_bzero to some pad paths; this issue generalises the pattern to the central deallocation helper). |
| CakePHP is a rapid development framework for PHP. In versions 4.5.11 and earlier, 4.6.0 through 4.6.3, 5.0.0 through 5.1.6, 5.2.0 through 5.2.12, and 5.3.0 through 5.3.5, View::_getElementFileName() does not check that the resolved element path is within the application/plugin view template paths. When element names are created with specifically crafted user-supplied data this weakness can be leveraged to include other PHP files on the server. Patched releases are available in 5.3.6, 5.2.13, 5.1.7, 4.6.4, and 4.5.11. |
| Typemill before 2.24.0 contains a path traversal vulnerability that allows authenticated attackers with Author-level privileges to read arbitrary files outside the content directory by supplying traversal sequences in the path query parameter passed to Storage::getFile() with an empty folder argument. Attackers can bypass traversal-prevention controls in Storage::getFolderPath() to access sensitive files. |
| TypeBot is a chatbot builder tool. In versions 3.16.1 and earlier, POST /api/blocks/file-input/v3/generate-upload-url is unauthenticated and uses unsanitized fileName input to construct public/ S3 object keys, while issuing presigned PUT URLs that do not bind Content-Type. As a result, any anonymous visitor to a published bot with a file input can upload attacker-controlled HTML, SVG, or JS to attacker-chosen subpaths, including other tenants’ publicly served result paths, enabling arbitrary content hosting and potential stored XSS on the storage origin. ../ traversal is blocked by S3/MinIO canonicalization (signature mismatch), but forward-slash path injection is exploitable. This issue has been fixed in version 3.17.0. |
| In Eclipse BaSyx Java Server SDK versions prior to 2.0.0-milestone-10, inadequate path normalization in the Submodel HTTP API allows an unauthenticated remote attacker to perform a path traversal attack. By supplying a maliciously crafted fileName parameter during a file upload operation, an attacker can bypass intended storage boundaries and write arbitrary files to any location on the host filesystem accessible by the Java process. This can lead to Remote Code Execution (RCE) and complete system compromise. |
| Jenkins Credentials Binding Plugin 719.v80e905ef14eb_ and earlier does not sanitize file names for file and zip file credentials, allowing attackers able to provide credentials to a job to write files to arbitrary locations on the node filesystem, which can lead to remote code execution if Jenkins is configured to allow a low-privileged user to configure file or zip file credentials used for a job running on the built-in node. |
| A vulnerability in the Trend Micro Apex One management console could allow a remote attacker to upload malicious code and execute commands on affected installations. This vulnerability is similar in scope to CVE-2025-71210 but affects a different executable.
Please note: although this vulnerability carries a technical critical CVSS rating, this was reported via responsible disclosure via a researcher through the Zero Day Initiative. The SaaS versions of the product have already been mitigated and no customer action required.
For this particular vulnerability, an attacker must have access to the Trend Micro Apex One Management Console, so customers that have their console�s IP address exposed externally should consider mitigating factors such as source restrictions if not already applied. |
| A vulnerability in the Trend Micro Apex One management console could allow a remote attacker to upload malicious code and execute commands on affected installations.
Please note: although this vulnerability carries a technical critical CVSS rating, this was reported via responsible disclosure via a researcher through the Zero Day Initiative. The SaaS versions of the product have already been mitigated and no customer action required.
For this particular vulnerability, an attacker must have access to the Trend Micro Apex One Management Console, so customers that have their console�s IP address exposed externally should consider mitigating factors such as source restrictions if not already applied. |
| FileBrowser Quantum is a free, self-hosted, web-based file manager. Versions prior to 1.3.2-stable, 1.4.0-beta and 1.4.1-beta are vulnerable to Path Traversal through the publicPatchHandler in backend/http/public.go which joins user-controlled fromPath and toPath body fields with the trusted d.share.Path BEFORE the downstream sanitizer runs. Because filepath.Join collapses .. segments during the join, the sanitizer in resourcePatchHandler never sees the traversal and the move/copy/rename operates on a path outside the shared directory. The same root-cause pattern was patched for the bulk DELETE endpoint as CVE-2026-44542 (GHSA-fwj3-42wh-8673), but the PATCH handler with the identical pattern was not updated. A public share link with AllowModify=true is sufficient to exploit this. Anyone holding such a link can move, copy, or rename arbitrary files within the share owner's source root. This issue has been fixed in versions 1.3.3-stable and 1.4.2-beta. |
| Runtipi is a personal homeserver orchestrator. In versions 4.9.1 through 4.9.3, Runtipi serves marketplace app logos from files inside cloned app-store repositories through an unauthenticated endpoint, which leads to arbitrary file read through app-store logo symlinks. The path guard checks only the lexical path before Node reads the file, so a Git app store that contains metadata/logo.jpg as a symbolic link can cause Runtipi to read and return the symlink target. Because the endpoint is public and the symlink target may point outside the cloned repository, this can expose local files from the Runtipi container such as /data/.env, /data/state/seed, logs, or application files. This can disclose JWT secrets, service credentials, local configuration, and operational logs depending on the instance. The issue has been fixed in version 4.10.0. |
| picklescan before 0.0.35 contains an unsafe pickle deserialization vulnerability allowing unauthenticated attackers to read arbitrary server files by chaining io.FileIO and urllib.request.urlopen. Attackers can bypass RCE-focused blocklists to exfiltrate sensitive data like /etc/passwd to external servers. |
| Contributor Arbitrary File Deletion in Fusion Builder <= 3.15.4 versions. |
| Unauthenticated Arbitrary File Deletion in WorkScout-Core <= 1.7.11 versions. |
| Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in QuantumCloud Conversational Forms for ChatBot allows Path Traversal.
This issue affects Conversational Forms for ChatBot: from n/a through 1.1.8. |
| Unauthenticated Arbitrary File Deletion in Car Zone <= 3.7 versions. |
| A path traversal vulnerability has been reported to affect License Center. If a local attacker gains an administrator account, they can then exploit the vulnerability to read the contents of unexpected files or system data.
We have already fixed the vulnerability in the following version:
License Center 1.9.56 and later |
