| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
media: rc: igorplugusb: heed coherency rules
In a control request, the USB request structure
can be subject to DMA on some HCs. Hence it must obey
the rules for DMA coherency. Allocate it separately. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mwifiex: fix use-after-free in mwifiex_adapter_cleanup()
The mwifiex_adapter_cleanup() function uses timer_delete()
(non-synchronous) for the wakeup_timer before the adapter structure is
freed. This is incorrect because timer_delete() does not wait for any
running timer callback to complete.
If the wakeup_timer callback (wakeup_timer_fn) is executing when
mwifiex_adapter_cleanup() is called, the callback will continue to
access adapter fields (adapter->hw_status, adapter->if_ops.card_reset,
etc.) which may be freed by mwifiex_free_adapter() called later in the
mwifiex_remove_card() path.
Use timer_delete_sync() instead to ensure any running timer callback has
completed before returning. |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: defio: Disconnect deferred I/O from the lifetime of struct fb_info
Hold state of deferred I/O in struct fb_deferred_io_state. Allocate an
instance as part of initializing deferred I/O and remove it only after
the final mapping has been closed. If the fb_info and the contained
deferred I/O meanwhile goes away, clear struct fb_deferred_io_state.info
to invalidate the mapping. Any access will then result in a SIGBUS
signal.
Fixes a long-standing problem, where a device hot-unplug happens while
user space still has an active mapping of the graphics memory. The hot-
unplug frees the instance of struct fb_info. Accessing the memory will
operate on undefined state. |
| In the Linux kernel, the following vulnerability has been resolved:
thermal: core: Fix thermal zone governor cleanup issues
If thermal_zone_device_register_with_trips() fails after adding
a thermal governor to the thermal zone being registered, the
governor is not removed from it as appropriate which may lead to
a memory leak.
In turn, thermal_zone_device_unregister() calls thermal_set_governor()
without acquiring the thermal zone lock beforehand which may race with
a governor update via sysfs and may lead to a use-after-free in that
case.
Address these issues by adding two thermal_set_governor() calls, one to
thermal_release() to remove the governor from the given thermal zone,
and one to the thermal zone registration error path to cover failures
preceding the thermal zone device registration. |
| In the Linux kernel, the following vulnerability has been resolved:
net: mctp: ensure our nlmsg responses are initialised
Syed Faraz Abrar (@farazsth98) from Zellic, and Pumpkin (@u1f383) from
DEVCORE Research Team working with Trend Micro Zero Day Initiative
report that a RTM_GETNEIGH will return uninitalised data in the pad
bytes of the ndmsg data.
Ensure we're initialising the netlink data to zero, in the link, addr
and neigh response messages. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_ncm: Fix net_device lifecycle with device_move
The network device outlived its parent gadget device during
disconnection, resulting in dangling sysfs links and null pointer
dereference problems.
A prior attempt to solve this by removing SET_NETDEV_DEV entirely [1]
was reverted due to power management ordering concerns and a NO-CARRIER
regression.
A subsequent attempt to defer net_device allocation to bind [2] broke
1:1 mapping between function instance and network device, making it
impossible for configfs to report the resolved interface name. This
results in a regression where the DHCP server fails on pmOS.
Use device_move to reparent the net_device between the gadget device and
/sys/devices/virtual/ across bind/unbind cycles. This preserves the
network interface across USB reconnection, allowing the DHCP server to
retain their binding.
Introduce gether_attach_gadget()/gether_detach_gadget() helpers and use
__free(detach_gadget) macro to undo attachment on bind failure. The
bind_count ensures device_move executes only on the first bind.
[1] https://lore.kernel.org/lkml/f2a4f9847617a0929d62025748384092e5f35cce.camel@crapouillou.net/
[2] https://lore.kernel.org/linux-usb/795ea759-7eaf-4f78-81f4-01ffbf2d7961@ixit.cz/ |
| In the Linux kernel, the following vulnerability has been resolved:
soc/tegra: pmc: Fix unsafe generic_handle_irq() call
Currently, when resuming from system suspend on Tegra platforms,
the following warning is observed:
WARNING: CPU: 0 PID: 14459 at kernel/irq/irqdesc.c:666
Call trace:
handle_irq_desc+0x20/0x58 (P)
tegra186_pmc_wake_syscore_resume+0xe4/0x15c
syscore_resume+0x3c/0xb8
suspend_devices_and_enter+0x510/0x540
pm_suspend+0x16c/0x1d8
The warning occurs because generic_handle_irq() is being called from
a non-interrupt context which is considered as unsafe.
Fix this warning by deferring generic_handle_irq() call to an IRQ work
which gets executed in hard IRQ context where generic_handle_irq()
can be called safely.
When PREEMPT_RT kernels are used, regular IRQ work (initialized with
init_irq_work) is deferred to run in per-CPU kthreads in preemptible
context rather than hard IRQ context. Hence, use the IRQ_WORK_INIT_HARD
variant so that with PREEMPT_RT kernels, the IRQ work is processed in
hardirq context instead of being deferred to a thread which is required
for calling generic_handle_irq().
On non-PREEMPT_RT kernels, both init_irq_work() and IRQ_WORK_INIT_HARD()
execute in IRQ context, so this change has no functional impact for
standard kernel configurations.
[treding@nvidia.com: miscellaneous cleanups] |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_conn: fix potential UAF in set_cig_params_sync
hci_conn lookup and field access must be covered by hdev lock in
set_cig_params_sync, otherwise it's possible it is freed concurrently.
Take hdev lock to prevent hci_conn from being deleted or modified
concurrently. Just RCU lock is not suitable here, as we also want to
avoid "tearing" in the configuration. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix UAF caused by decrementing sbi->nr_pages[] in f2fs_write_end_io()
The xfstests case "generic/107" and syzbot have both reported a NULL
pointer dereference.
The concurrent scenario that triggers the panic is as follows:
F2FS_WB_CP_DATA write callback umount
- f2fs_write_checkpoint
- f2fs_wait_on_all_pages(sbi, F2FS_WB_CP_DATA)
- blk_mq_end_request
- bio_endio
- f2fs_write_end_io
: dec_page_count(sbi, F2FS_WB_CP_DATA)
: wake_up(&sbi->cp_wait)
- kill_f2fs_super
- kill_block_super
- f2fs_put_super
: iput(sbi->node_inode)
: sbi->node_inode = NULL
: f2fs_in_warm_node_list
- is_node_folio // sbi->node_inode is NULL and panic
The root cause is that f2fs_put_super() calls iput(sbi->node_inode) and
sets sbi->node_inode to NULL after sbi->nr_pages[F2FS_WB_CP_DATA] is
decremented to zero. As a result, f2fs_in_warm_node_list() may
dereference a NULL node_inode when checking whether a folio belongs to
the node inode, leading to a panic.
This patch fixes the issue by calling f2fs_in_warm_node_list() before
decrementing sbi->nr_pages[F2FS_WB_CP_DATA], thus preventing the
use-after-free condition. |
| In the Linux kernel, the following vulnerability has been resolved:
writeback: Fix use after free in inode_switch_wbs_work_fn()
inode_switch_wbs_work_fn() has a loop like:
wb_get(new_wb);
while (1) {
list = llist_del_all(&new_wb->switch_wbs_ctxs);
/* Nothing to do? */
if (!list)
break;
... process the items ...
}
Now adding of items to the list looks like:
wb_queue_isw()
if (llist_add(&isw->list, &wb->switch_wbs_ctxs))
queue_work(isw_wq, &wb->switch_work);
Because inode_switch_wbs_work_fn() loops when processing isw items, it
can happen that wb->switch_work is pending while wb->switch_wbs_ctxs is
empty. This is a problem because in that case wb can get freed (no isw
items -> no wb reference) while the work is still pending causing
use-after-free issues.
We cannot just fix this by cancelling work when freeing wb because that
could still trigger problematic 0 -> 1 transitions on wb refcount due to
wb_get() in inode_switch_wbs_work_fn(). It could be all handled with
more careful code but that seems unnecessarily complex so let's avoid
that until it is proven that the looping actually brings practical
benefit. Just remove the loop from inode_switch_wbs_work_fn() instead.
That way when wb_queue_isw() queues work, we are guaranteed we have
added the first item to wb->switch_wbs_ctxs and nobody is going to
remove it (and drop the wb reference it holds) until the queued work
runs. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: hold dev ref until after transport_finish NF_HOOK
After async crypto completes, xfrm_input_resume() calls dev_put()
immediately on re-entry before the skb reaches transport_finish.
The skb->dev pointer is then used inside NF_HOOK and its okfn,
which can race with device teardown.
Remove the dev_put from the async resumption entry and instead
drop the reference after the NF_HOOK call in transport_finish,
using a saved device pointer since NF_HOOK may consume the skb.
This covers NF_DROP, NF_QUEUE and NF_STOLEN paths that skip
the okfn.
For non-transport exits (decaps, gro, drop) and secondary
async return points, release the reference inline when
async is set. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (pmbus/core) Protect regulator operations with mutex
The regulator operations pmbus_regulator_get_voltage(),
pmbus_regulator_set_voltage(), and pmbus_regulator_list_voltage()
access PMBus registers and shared data but were not protected by
the update_lock mutex. This could lead to race conditions.
However, adding mutex protection directly to these functions causes
a deadlock because pmbus_regulator_notify() (which calls
regulator_notifier_call_chain()) is often called with the mutex
already held (e.g., from pmbus_fault_handler()). If a regulator
callback then calls one of the now-protected voltage functions,
it will attempt to acquire the same mutex.
Rework pmbus_regulator_notify() to utilize a worker function to
send notifications outside of the mutex protection. Events are
stored as atomics in a per-page bitmask and processed by the worker.
Initialize the worker and its associated data during regulator
registration, and ensure it is cancelled on device removal using
devm_add_action_or_reset().
While at it, remove the unnecessary include of linux/of.h. |
| Memory safety bug fixed in Firefox 152. This vulnerability was fixed in Firefox 152, Firefox ESR 140.12, Firefox ESR 115.37, Thunderbird 152, and Thunderbird 140.12. |
| Use-after-free in the Graphics: WebGPU component. This vulnerability was fixed in Firefox 152 and Thunderbird 152. |
| Memory safety bug fixed in Firefox 152. This vulnerability was fixed in Firefox 152 and Thunderbird 152. |
| Use after free in Downloads in Google Chrome on Android prior to 149.0.7827.155 allowed a remote attacker to potentially exploit heap corruption via a crafted HTML page. (Chromium security severity: High) |
| Use after free in Extensions in Google Chrome prior to 149.0.7827.155 allowed a remote attacker who had compromised the renderer process to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: High) |
| Use after free in Media in Google Chrome prior to 149.0.7827.155 allowed a remote attacker who had compromised the renderer process to execute arbitrary code inside a sandbox via a crafted HTML page. (Chromium security severity: High) |
| Use after free in Browser in Google Chrome prior to 149.0.7827.155 allowed a remote attacker who had compromised the renderer process to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: High) |
| In Eclipse Theia versions prior to 1.69.0, custom task definitions in workspace files (e.g. .theia/tasks.json, .vscode/tasks.json) could be executed without requiring workspace trust. An attacker could craft a malicious repository that, when cloned and opened in Theia, leads to execution of arbitrary commands with the user's privileges. In combination with AI chat features and a workspace .theia/settings.json that disabled tool confirmation, this could be triggered automatically by sending a message in the AI chat. |
