| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability in Apache Kvrocks.
This issue affects Apache Kvrocks: from 2.6.0 through 2.15.0.
Users are recommended to upgrade to version 2.16.0, which fixes the issue. |
| If NSD is configured as secondary for a zone, the primary of that zone can crash NSD with an AXFR containing a DNS message with a special crafted SVCB RR with an rdata size of 65512, that let's an (uint16_t) variable that is used to allocate space needed for the RR wrap (because total size > 65535), causing a heap overflow. The attacker can perform a controlled (RCE class) head write of up to 65509 bytes |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ipset: stop hash:* range iteration at end
The following hash set variants:
hash:ip,mark
hash:ip,port
hash:ip,port,ip
hash:ip,port,net
iterate IPv4 ranges with a 32-bit iterator.
The iterator must stop once the last address in the requested range has
been processed. Advancing it once more can move the traversal state past
the end of the request, so a later retry may continue from an unintended
position.
Handle the iterator increment explicitly at the end of the loop and stop
once the upper bound has been processed. This keeps the existing retry
behaviour intact for valid ranges while preventing traversal from
continuing past the original boundary. |
| In the Linux kernel, the following vulnerability has been resolved:
erofs: unify lcn as u64 for 32-bit platforms
As sashiko reported [1], `lcn` was typed as `unsigned long` (or
`unsigned int` sometimes), which is only 32 bits wide on 32-bit
platforms, which causes `(lcn << lclusterbits)` to be truncated
at 4 GiB.
In order to consolidate the logic, just use `u64` consistently
around the codebase.
[1] https://sashiko.dev/r/20260420034612.1899973-1-hsiangkao%40linux.alibaba.com |
| concurrent-ruby is a modern concurrency tools for Ruby. Prior to 1.3.7, Concurrent::ReentrantReadWriteLock can incorrectly grant a write lock after one thread acquires the read lock 32,768 times. The lock stores a thread's local read and write hold counts in one integer. The low 15 bits are used for the read hold count, and bit 15 is used as WRITE_LOCK_HELD. After 32,768 reentrant read acquisitions, the local read count crosses into the write-lock bit. try_write_lock then treats the thread as already holding a write lock and returns true without setting the global RUNNING_WRITER bit. This breaks the core mutual-exclusion guarantee: the caller is told it has a write lock, but other threads can still hold or acquire read locks at the same time. This vulnerability is fixed in 1.3.7. |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: dev: prevent integer overflow in I2C_TIMEOUT ioctl
While fuzzing with Syzkaller, a persistent `schedule_timeout: wrong
timeout value` warning was observed, accompanied by SMBus controller
state machine corruption.
The I2C_TIMEOUT ioctl accepts a user-provided timeout in multiples of
10 ms. The user argument is checked against INT_MAX, but it is
subsequently multiplied by 10 before being passed to msecs_to_jiffies().
A malicious user can pass a large value (e.g., 429496729) that passes
the `arg > INT_MAX` check but overflows when multiplied by 10. This
results in a truncated 32-bit unsigned value that bypasses the
internal `(int)m < 0` check in `msecs_to_jiffies()`.
The truncated value is then assigned to `client->adapter->timeout`
(a signed 32-bit int), which is reinterpreted as a negative number.
When passed to wait_for_completion_timeout(), this negative value
undergoes sign extension to a 64-bit unsigned long, triggering the
`schedule_timeout` warning and causing premature returns. This leaves
the SMBus state machine in an unrecoverable state, constituting a
local Denial of Service (DoS).
Fix this by bounding the user argument to `INT_MAX / 10`.
[wsa: move the comment as well] |
| Integer Overflow or Wraparound vulnerability in the EtherNet/IP function of Mitsubishi Electric MELSEC iQ-F Series FX5-EIP EtherNet/IP module FX5-EIP versions 1.000 and prior allows a remote attacker to cause a denial-of-service (DoS) condition in the affected product by rapidly establishing a large number of TCP connections to it, resulting in an inconsistency in the product's internal connection management process and triggering improper memory access. |
| libheif is a HEIF and AVIF file format decoder and encoder. Prior to version 1.22.1, the uncompressed HEIF decoder validates explicit icef compressed-unit offsets using unit_offset + unit_size. Because the addition can wrap, a crafted HEIF file can pass the range check and then construct a vector from iterators outside the compressed item buffer, producing an out-of-bounds heap read and crash. Version 1.22.1 patches the issue. |
| libde265 is an open source implementation of the h.265 video codec. Prior to version 1.1.0, a crafted H.265 bitstream with large SPS dimensions and 16-bit bit depth causes a signed integer overflow in `de265_image_get_buffer()` (`libde265/image.cc:128`). The overflow wraps the plane allocation size to a small value (~1 KB), but the subsequent `fill_image()` call computes the real size using `size_t`, writing ~4 GB into the undersized heap buffer. Version 1.1.0 patches the issue. |
| MessagePack for C# is a MessagePack serializer for C#. Prior to 2.5.301 and 3.1.7, MessagePackReader.ReadDateTime() can allocate stack memory based on an attacker-controlled MessagePack extension length. In the slow path for timestamp extension parsing, the computed tokenSize includes the extension body length from the wire and is used in a stackalloc operation before the extension length is validated as one of the valid timestamp sizes. A very small payload can claim a large timestamp extension body and cause a stack allocation large enough to trigger an uncatchable StackOverflowException, terminating the host process. This vulnerability is fixed in 2.5.301 and 3.1.7. |
| A flaw was found in virtio-win. A low-integrity process can issue an IOCTL request to viosock.sys!VIOSockSelect with a maliciously crafted request that causes an integer overflow. This allows the process to circumvent bounds checking, resulting in a heap overflow in the NonPagedPool kernel heap. The flaw could be exploited to escalate privileges on Windows systems running this driver. |
| In multiple locations, there is a possible way to achieve code execution due to an integer overflow. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. |
| LiamBindle MQTT-C through version 1.1.6 contains a heap-based out-of-bounds read and integer underflow in the mqtt_unpack_publish_response() function in src/mqtt.c that allows a remote unauthenticated attacker controlling an MQTT broker - or able to inject MQTT traffic into an unencrypted session - to crash a subscribed MQTT-C client and potentially disclose adjacent heap memory by sending a single crafted PUBLISH packet. The function validates only that the fixed-header remaining_length is at least 4, then reads the 16-bit topic_name_size field from the broker-controlled packet and advances the parse pointer by that value without verifying that topic_name_size plus the surrounding overhead fits within remaining_length; it subsequently computes application_message_size as remaining_length - topic_name_size - 2 (QoS 0) or - 4 (QoS greater than 0) in unsigned arithmetic, producing an integer underflow that is then passed to memmove(). A PUBLISH packet with topic_name_size = 0xFFFF and remaining_length = 7 advances the parse pointer 65535 bytes past the receive buffer (out-of-bounds read) and causes an application_message_size near 2^32, crashing the process when the resulting memmove() is executed. |
| driftregion iso14229 through 0.9.0 contains an integer underflow and downstream out-of-bounds read in the Handle_0x27_SecurityAccess() function in iso14229.c that allows a remote unauthenticated attacker to crash a UDS server and potentially read memory past the receive buffer by sending a single-byte 0x27 SecurityAccess request that follows any earlier well-formed 0x27 message. The handler reads the SecurityAccess subFunction from recv_buf[1] without first checking that recv_len is at least 2, then computes the key-data length as the unsigned subtraction (uint16_t)(recv_len - UDS_0X27_REQ_BASE_LEN); when recv_len equals 1 the result underflows to 65535 and is passed as args.len to the application's SecAccessValidateKey or SecAccessRequestSeed callback, which typically iterates or copies that many bytes from the 4-KB receive buffer. Every other UDS sub-function handler in the library (0x10, 0x11, 0x14, 0x19, 0x22, 0x23, 0x28, and others) performs an explicit recv_len lower-bound check before indexing; Handle_0x27_SecurityAccess is the sole outlier. The vulnerable handler reaches over CAN bus, OBD-II, ISO-TP, and DoIP transports and is exposed in the default diagnostic session without prior authentication; deployments on automotive ECUs, industrial controllers, and IoT devices that ship iso14229 as their UDS server are affected. |
| A flaw was found in xorg-server. A specially crafted request to RRChangeProviderProperty or RRChangeOutputProperty can trigger an integer overflow which may lead to a disclosure of sensitive information. |
| Vim is an open source command line text editor. In affected versions when shifting lines in operator pending mode and using a very large value, it may be possible to overflow the size of integer. Impact is low, user interaction is required and a crash may not even happen in all situations. This issue has been addressed in commit `6bf131888` which has been included in version 9.0.2112. Users are advised to upgrade. There are no known workarounds for this vulnerability. |
| Vim is an open source command line text editor. When using the z= command, the user may overflow the count with values larger
than MAX_INT. Impact is low, user interaction is required and a crash may not even happen in all situations. This vulnerability has been addressed in commit `73b2d379` which has been included in release version 9.0.2111. Users are advised to upgrade. There are no known workarounds for this vulnerability. |
| Vim is an open source command line text editor. When parsing relative ex addresses one may unintentionally cause an
overflow. Ironically this happens in the existing overflow check, because the line number becomes negative and LONG_MAX - lnum will cause the overflow. Impact is low, user interaction is required and a crash may not even happen in all situations. This issue has been addressed in commit `060623e` which has been included in release version 9.0.2110. Users are advised to upgrade. There are no known workarounds for this vulnerability. |
| Vim is an open source command line text editor. When getting the count for a normal mode z command, it may overflow for large counts given. Impact is low, user interaction is required and a crash may not even happen in all situations. This issue has been addressed in commit `58f9befca1` which has been included in release version 9.0.2109. Users are advised to upgrade. There are no known workarounds for this vulnerability. |
| Vim is an open source command line text editor. If the count after the :s command is larger than what fits into a (signed) long variable, abort with e_value_too_large. Impact is low, user interaction is required and a crash may not even happen in all situations. This issue has been addressed in commit `ac6378773` which has been included in release version 9.0.2108. Users are advised to upgrade. There are no known workarounds for this vulnerability. |
