| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A flaw was found in Ansible Automation Platform (AAP) where the Gateway API returns the client secret for certain GitHub Enterprise authenticators in clear text. This vulnerability affects administrators or auditors accessing authenticator configurations. While access is limited to privileged users, the clear text exposure of sensitive credentials increases the risk of accidental leaks or misuse. |
| A flaw was found in Ansible Automation Platform (AAP). Read-only scoped OAuth2 API Tokens in AAP, are enforced at the Gateway level for Gateway-specific operations. However, this vulnerability allows read-only tokens to perform write operations on backend services (e.g., Controller, Hub, EDA). If this flaw were exploited, an attacker‘s capabilities would only be limited by role based access controls (RBAC). |
| A flaw was found in the EDA component of the Ansible Automation Platform, where user-supplied Git branch or refspec values are evaluated as Jinja2 templates. This vulnerability allows authenticated users to inject expressions that execute commands or access sensitive files on the EDA worker. In OpenShift, it can lead to service account token theft. |
| A vulnerability was found in the Ansible Automation Platform (AAP). This flaw allows attackers to escalate privileges by improperly leveraging read-scoped OAuth2 tokens to gain write access. This issue affects API endpoints that rely on ansible_base.oauth2_provider for OAuth2 authentication. While the impact is limited to actions within the user’s assigned permissions, it undermines scoped access controls, potentially allowing unintended modifications in the application and consuming services. |
| nanoid (aka Nano ID) before 5.0.9 mishandles non-integer values. 3.3.8 is also a fixed version. |
| quic-go is an implementation of the QUIC protocol in Go. An off-path attacker can inject an ICMP Packet Too Large packet. Since affected quic-go versions used IP_PMTUDISC_DO, the kernel would then return a "message too large" error on sendmsg, i.e. when quic-go attempts to send a packet that exceeds the MTU claimed in that ICMP packet. By setting this value to smaller than 1200 bytes (the minimum MTU for QUIC), the attacker can disrupt a QUIC connection. Crucially, this can be done after completion of the handshake, thereby circumventing any TCP fallback that might be implemented on the application layer (for example, many browsers fall back to HTTP over TCP if they're unable to establish a QUIC connection). The attacker needs to at least know the client's IP and port tuple to mount an attack. This vulnerability is fixed in 0.48.2. |
| A malformed DNS message in response to a query can cause the Lookup functions to get stuck in an infinite loop. |
| path-to-regexp turns path strings into a regular expressions. In certain cases, path-to-regexp will output a regular expression that can be exploited to cause poor performance. Because JavaScript is single threaded and regex matching runs on the main thread, poor performance will block the event loop and lead to a DoS. The bad regular expression is generated any time you have two parameters within a single segment, separated by something that is not a period (.). For users of 0.1, upgrade to 0.1.10. All other users should upgrade to 8.0.0. |
| A flaw was found in Event-Driven Automation (EDA) in Ansible Automation Platform (AAP), which lacks encryption of sensitive information. An attacker with network access could exploit this vulnerability by sniffing the plaintext data transmitted between the EDA and AAP. An attacker with system access could exploit this vulnerability by reading the plaintext data stored in EDA and AAP databases. |
| Requests is a HTTP library. Prior to 2.32.0, when making requests through a Requests `Session`, if the first request is made with `verify=False` to disable cert verification, all subsequent requests to the same host will continue to ignore cert verification regardless of changes to the value of `verify`. This behavior will continue for the lifecycle of the connection in the connection pool. This vulnerability is fixed in 2.32.0. |
| Passing a heavily nested list to sqlparse.parse() leads to a Denial of Service due to RecursionError.
|
| A flaw was found in the Red Hat Ansible Automation Platform, Event-Driven Ansible (EDA) Event Stream API. This vulnerability allows exposure of sensitive client credentials and internal infrastructure headers via the test_headers field when an event stream is in test mode. The possible outcome includes leakage of internal infrastructure details, accidental disclosure of user or system credentials, privilege escalation if high-value tokens are exposed, and persistent sensitive data exposure to all users with read access on the event stream. |
| A flaw was found in the Red Hat Ansible Automation Platform, Event-Driven Ansible (EDA) Event Streams. This vulnerability allows an authenticated user to gain access to sensitive internal infrastructure headers (such as X-Trusted-Proxy and X-Envoy-*) and event stream URLs via crafted requests and job templates. By exfiltrating these headers, an attacker could spoof trusted requests, escalate privileges, or perform malicious event injection. |
| A flaw was found in the Red Hat Ansible Automation Platform Gateway route creation component. This vulnerability allows credential theft via the creation of misleading routes using a double-slash (//) prefix in the gateway_path. A malicious or socially engineered administrator can configure a honey-pot route to intercept and exfiltrate user credentials, potentially maintaining persistent access or creating a backdoor even after their permissions are revoked. |
| A flaw was found in the python-cryptography package. This issue may allow a remote attacker to decrypt captured messages in TLS servers that use RSA key exchanges, which may lead to exposure of confidential or sensitive data. |
| A vulnerability was found in JWCrypto. This flaw allows an attacker to cause a denial of service (DoS) attack and possible password brute-force and dictionary attacks to be more resource-intensive. This issue can result in a large amount of computational consumption, causing a denial of service attack. |
| Jinja is an extensible templating engine. Prior to 3.1.6, an oversight in how the Jinja sandboxed environment interacts with the |attr filter allows an attacker that controls the content of a template to execute arbitrary Python code. To exploit the vulnerability, an attacker needs to control the content of a template. Whether that is the case depends on the type of application using Jinja. This vulnerability impacts users of applications which execute untrusted templates. Jinja's sandbox does catch calls to str.format and ensures they don't escape the sandbox. However, it's possible to use the |attr filter to get a reference to a string's plain format method, bypassing the sandbox. After the fix, the |attr filter no longer bypasses the environment's attribute lookup. This vulnerability is fixed in 3.1.6. |
| A flaw was found in the Ansible Automation Platform. When creating a new keypair, the ec2_key module prints out the private key directly to the standard output. This flaw allows an attacker to fetch those keys from the log files, compromising the system's confidentiality, integrity, and availability. |
| aiohttp is an asynchronous HTTP client/server framework for asyncio and Python. When using aiohttp as a web server and configuring static routes, it is necessary to specify the root path for static files. Additionally, the option 'follow_symlinks' can be used to determine whether to follow symbolic links outside the static root directory. When 'follow_symlinks' is set to True, there is no validation to check if reading a file is within the root directory. This can lead to directory traversal vulnerabilities, resulting in unauthorized access to arbitrary files on the system, even when symlinks are not present. Disabling follow_symlinks and using a reverse proxy are encouraged mitigations. Version 3.9.2 fixes this issue. |
| urllib3 is a user-friendly HTTP client library for Python. When using urllib3's proxy support with `ProxyManager`, the `Proxy-Authorization` header is only sent to the configured proxy, as expected. However, when sending HTTP requests *without* using urllib3's proxy support, it's possible to accidentally configure the `Proxy-Authorization` header even though it won't have any effect as the request is not using a forwarding proxy or a tunneling proxy. In those cases, urllib3 doesn't treat the `Proxy-Authorization` HTTP header as one carrying authentication material and thus doesn't strip the header on cross-origin redirects. Because this is a highly unlikely scenario, we believe the severity of this vulnerability is low for almost all users. Out of an abundance of caution urllib3 will automatically strip the `Proxy-Authorization` header during cross-origin redirects to avoid the small chance that users are doing this on accident. Users should use urllib3's proxy support or disable automatic redirects to achieve safe processing of the `Proxy-Authorization` header, but we still decided to strip the header by default in order to further protect users who aren't using the correct approach. We believe the number of usages affected by this advisory is low. It requires all of the following to be true to be exploited: 1. Setting the `Proxy-Authorization` header without using urllib3's built-in proxy support. 2. Not disabling HTTP redirects. 3. Either not using an HTTPS origin server or for the proxy or target origin to redirect to a malicious origin. Users are advised to update to either version 1.26.19 or version 2.2.2. Users unable to upgrade may use the `Proxy-Authorization` header with urllib3's `ProxyManager`, disable HTTP redirects using `redirects=False` when sending requests, or not user the `Proxy-Authorization` header as mitigations. |
